CBZG0BG Push-Pull Connector for X-ray Residual Stress Analyzers 2026: 0B 5-Contact Panel Socket

The CBZG0BG-SFSM05-0000 is a CBZG0BG push-pull connector for X-ray residual stress analyzers — a compact 0B fixed panel-mount receptacle with five low-voltage contacts, a rated current of 5 A, published minimum shielding performance of 75 dB at 10 MHz and 40 dB at 1 GHz, a push-pull self-locking mechanism, an M9 panel mounting hole, 5,000 mating cycles, operation from -45 °C to +125 °C, vibration resistance of 10~20,000 Hz at 15 g and IP50 protection. Every specification in this guide is backed by the NDT equipment interconnect engineering of Spring Technology.

Pain point: Terminating the measurement head on a portable diffractometer — where the head is repositioned around gears, welds and crankshafts, the cable is plugged and unplugged at every setup, and low-level detector electronics must survive the electrical noise of a machine shop?

Core answer: The CBZG0BG-SFSM05-0000 supports reliable control and auxiliary signal connections in portable X-ray residual stress analysis equipment. These analyzers are specialised non-destructive testing instruments used to evaluate residual stress in metal components and manufactured structures — stress that can develop during machining, welding, grinding, heat treatment, rolling and shot peening, and which if not properly controlled may contribute to fatigue damage, deformation, cracking and reduced component service life. X-ray diffraction (XRD) technology allows engineers to evaluate residual stress without cutting or destroying the tested component, with typical applications including residual stress inspection of gears and bearings, quality testing of welded structures, inspection of aircraft and aerospace components, evaluation of crankshafts and transmission parts, and analysis after heat treatment or surface modification. A portable analyzer generally consists of an X-ray source, measurement head, detector, positioning mechanism, control electronics and data acquisition software — and this panel receptacle can be considered for the electrical interface between the measurement head assembly and the analyzer’s control electronics.

The CBZG0BG-SFSM05-0000 is a fixed panel-mount receptacle on the compact 0B platform, offered with a five-contact configuration.

• Latching Mechanism: Push-pull self-locking mechanism with a compatible cable plug (secure during operation, convenient setup)
• Recommended Hardware: Spring Technology Circular Connector and custom cable assembly service
• Key Metric: 5 low-voltage contacts; 5 A; shielded 75 dB / 40 dB; M9 panel hole; 5,000 mating cycles; IP50

Note: the exact panel cutout, mounting orientation and mating plug must be confirmed against the product drawing before machining an enclosure. The shielding figures are connection-level references — combined with suitable shielded cables and proper grounding the connector can contribute to electromagnetic compatibility, but signal quality depends on the complete assembly. IP50 is not a water-exposure rating.

A diffractometer head moves around the part, not the other way round. The design advantages below explain why this CBZG0BG push-pull connector for X-ray residual stress analyzers suits portable measurement equipment:

• Portable X-ray analyzers integrate several electronic modules that require electrical connections, and the five low-voltage contacts allow multiple auxiliary circuits to be connected through a single panel-mounted receptacle — assignable to measurement-head control, status feedback, interlock signals or other low-voltage functions depending on the system design, simplifying the front-panel connection layout and reducing the need for several independent connectors.

• Portable residual stress analyzers are often moved between laboratories, production lines and industrial inspection locations, and technicians may need to connect and disconnect measurement-head cables when configuring the instrument for different components or measurement positions. The push-pull self-locking mechanism allows the compatible cable plug to be inserted and removed conveniently while maintaining a secure connection during operation — useful for modular measurement systems that require regular setup, maintenance and accessory replacement.

• A portable X-ray measurement system may contain control circuits, status signals and auxiliary electrical connections between its measurement head and main unit, and the five-contact configuration provides a compact interface for these low-voltage circuits. By combining several connections in one receptacle, designers simplify panel wiring and create a more organised connection point — with the actual contact assignment following the instrument’s electrical schematic and the requirements of the measurement-head electronics.

• Residual stress analyzers contain sensitive electronic measurement and data acquisition circuits, and interference from nearby motors, industrial power equipment and other electrical systems may affect signal quality if the equipment is not properly designed. The published specification lists minimum shielding performance of 75 dB at 10 MHz and 40 dB at 1 GHz for this connector configuration — contributing to electromagnetic compatibility in the instrument’s low-voltage interface when combined with suitable shielded cables and proper grounding.

• The CBZG0BG-SFSM05-0000 is a fixed panel-mounted receptacle with an M9 panel mounting hole, allowing the connector to be installed directly on the analyzer’s enclosure and providing a defined connection point for external cables. Its panel-mounted structure keeps cable connections organised and supports modular equipment design — and the receptacle can be paired with a compatible TGG.0B.305-series cable plug for a detachable connection, subject to confirmation of the complete assembly and mechanical requirements.

Portable X-ray residual stress analyzers require reliable connections between their measurement heads, control electronics and auxiliary modules. This CBZG0BG push-pull connector for X-ray residual stress analyzers offers:

• Five low-voltage contacts: supports multiple auxiliary and control circuits.
• Push-pull self-locking: allows convenient connection and disconnection.
• Panel-mounted installation: provides a stable and organised equipment interface.
• Shielded construction: helps manage electromagnetic interference when properly integrated.
• 5,000 mating cycles: supports repeated connection operations.
• Compact 0B-series design: helps save space on equipment panels.

These features make the CBZG0BG-SFSM05-0000 a potential connector option for low-voltage control and auxiliary signal interfaces in portable X-ray residual stress analyzers.

The 0B shell belongs to Spring Technology’s compact push-pull connector family for portable instruments and NDT equipment. The same platform serves this CBZG0BG push-pull connector for X-ray residual stress analyzers and scales across panel sockets, plugs and PCB sockets.

• Panel sockets: ZGG.0B fixed sockets (as used here), plus ZEG.0B and ZCG.0B variants.
• Plugs: TG 0B straight plugs and TH 0B elbow plugs, including a 305-series insert listed as the compatible mating plug.
• PCB sockets: ZX 0B sockets with PCB contacts.
• Pin counts: 2–9 contacts across the 0B shell, with key G or keys A…M and R.

• Custom contact allocations and part numbers (such as the CBZG0BG-SFSM05-0000) matched to each instrument’s panel interface.
• Shielded head-cable builds with 360° screen termination and bend relief.
• Panel cutout and mounting consultation for compact enclosure integration.
• Mating plug selection support, including keying and contact-layout confirmation.

Portable X-ray residual stress analyzers help manufacturers and inspection engineers evaluate the internal stress condition of metal components without destructive testing, and a reliable electrical interface between the measurement head and the main control unit is important for convenient operation and equipment maintenance. With five low-voltage contacts, push-pull locking, panel-mounted installation and shielding performance, the CBZG0BG-SFSM05-0000 is worth evaluating for compatible control and auxiliary signal connections in portable X-ray measurement equipment — with final selection based on the equipment’s electrical interface, contact assignment, cable assembly and environmental requirements. This connector shows how Spring Technology serves NDT equipment, aligning a shielded 0B panel socket with the customer’s analyzer requirements, and the company also provides professional customization services for both push-pull connectors and cable assemblies, offering tailored solutions to meet your specific technical requirements.

For more information about our 0B series connectors or to discuss your requirements, contact us at [email protected] or [email protected], or visit our website. Our engineering team will respond to your CBZG0BG push-pull connector for X-ray residual stress analyzers enquiry within 24 hours.

• CBTG1BG Push-Pull Connector for Digital Radiography Detectors 2026: 1B 8-Contact 1 Gb/s Plug
• CBZE0BG Push-Pull Connector for Handheld XRF Analyzers 2026: 0B Series 4-Contact 7 A Receptacle for Compact Analytical Instruments
• CBZE1BG Push-Pull Connector for Magnetic Particle Inspection Equipment 2026: 1B 2-Contact 15 A Panel Socket
• CBTG1BG Push-Pull Connector for Ultrasonic Flaw Detectors 2026: 1B Series 7-Contact 7 A Plug for Portable NDT Instrument Interfaces
• CBTG2FN Push-Pull Connector for Precision Machine Tools 2026: CBTG2FN-SMSM09-D520 and CBZL2FN-SFPM09-S000 for Multi-Channel Miniature Sensor Aggregation for Russian Client
• ZGG.0B Fixed Socket — Product Page
• TGG.0B Connector — Product Page
• 0B Series Connector