CBTG1BG Push-Pull Connector for UV Curing Radiometers 2026: 1B 2-Contact Shielded Plug

The CBTG1BG-SMSM02-D52B is a CBTG1BG push-pull connector for UV curing radiometers — a 1B straight cable plug with two low-voltage male solder contacts, a published rated current of 15 A, published minimum shielding performance of 75 dB at 10 MHz and 40 dB at 1 GHz, a push-pull self-latching mechanism, a cable collet with a nut for fitting a bend relief, a supported cable outside diameter of 4.30–5.20 mm, a shielded metal housing, IP50 protection and more than 5,000 mating cycles. Every specification in this guide is backed by the optical measurement equipment interconnect engineering of Spring Technology.

Pain point: Reading UV irradiance beside a curing lamp, an LED driver and a bank of control electronics — where the sensor probe is swapped between curing stations and the two signal wires must stay clean of the electromagnetic noise that surrounds them?

Core answer: The CBTG1BG-SMSM02-D52B can be used in portable UV curing radiometers — its two low-voltage contacts, push-pull locking and effective cable shielding provide a practical connection option for detachable UV sensor probe assemblies. UV curing technology is widely used in electronics manufacturing, optical component assembly, medical device production and industrial adhesive bonding, where UV light sources cure specialised adhesives and coatings within controlled exposure conditions. To maintain consistent curing quality, manufacturers monitor the intensity and output performance of their UV curing equipment, and a portable UV curing radiometer measures UV irradiance to help operators evaluate the condition of UV lamps, LED curing sources and light guides. The connector can be considered for the detachable cable interface between a portable radiometer and an external UV detector probe, with its two contacts assigned to compatible sensor power and measurement circuits.

The CBTG1BG-SMSM02-D52B is a straight cable plug on the 1B platform, offered with a two-contact configuration.

• Latching Mechanism: Push-pull self-latching mechanism (convenient probe replacement without threaded coupling)
• Recommended Hardware: Spring Technology Circular Connector and custom cable assembly service
• Key Metric: 2 low-voltage contacts; shielded; 75 dB / 40 dB; 15 A published rating; IP50

Note: the 15 A rating relates to the connector’s own electrical limits and must be reconciled with the actual sensor circuit, cable assembly and thermal conditions — overall radiometer accuracy still depends on the detector, cable, circuit design and complete measurement system. IP50 is not a water-immersion rating.

UV measurements are low-level signals in a noisy neighbourhood. The design advantages below explain why this CBTG1BG push-pull connector for UV curing radiometers suits portable optical measurement equipment:

• The CBTG1BG-SMSM02-D52B features two low-voltage contacts. For a compatible UV radiometer design these can be assigned to sensor power and measurement signal connections, providing a straightforward interface between the UV detector probe and the handheld instrument — with the actual pin assignment determined by the sensor’s electrical architecture.

• UV radiometers use electronic circuits to process signals generated by their optical detectors. The CBTG1BG-SMSM02-D52B features a shielded metal connector construction, and the published specification lists minimum shielding performance of 75 dB at 10 MHz and 40 dB at 1 GHz — helping designers manage electromagnetic interference around the connector interface, particularly near industrial UV curing equipment, power supplies and control electronics.

• Portable UV radiometers may require different detector probes for different measurement conditions, including UV LED sources, spot-curing systems and other UV light sources. The push-pull self-latching mechanism allows technicians to connect and disconnect compatible cable assemblies conveniently — simplifying probe replacement and routine maintenance without repeated threaded coupling operations.

• The CBTG1BG-SMSM02-D52B supports cable outside diameters of 4.30–5.20 mm, and its cable collet secures the cable within the connector assembly. The D52B configuration also provides a nut for fitting a bend relief, helping reduce mechanical stress around the cable termination — useful for portable radiometers whose sensor cables are frequently repositioned during UV intensity inspections.

• The connector uses male solder contacts, allowing manufacturers to develop customised cable assemblies for UV detector probes, with internal wiring configured according to detector output, power requirements and radiometer circuit design — useful when developing instruments with different probe lengths or interchangeable sensor accessories.

• Portable UV curing radiometers are designed for convenient handling and movement between production stations. The 1B connector format provides a compact circular interface for the external sensor cable, and its metal housing and push-pull locking mechanism support repeated connection and disconnection in suitable industrial environments.

Portable UV curing radiometers require convenient sensor connections and reliable cable interfaces for routine process monitoring. This CBTG1BG push-pull connector for UV curing radiometers offers:

• Two low-voltage contacts for compatible sensor circuits.
• Shielding performance of at least 75 dB at 10 MHz and 40 dB at 1 GHz.
• Push-pull locking for convenient probe connection and removal.
• Solder termination for customised sensor cable assemblies.
• Cable compatibility with an outside diameter of 4.30–5.20 mm.
• Cable collet and bend-relief provision for mechanical cable protection.
• A 15 A rated current for compatible electrical applications.
• IP50 protection for indoor and protected environments.

These characteristics make the connector a potential option for detachable sensor cable assemblies in portable UV curing radiometers.

The 1B shell belongs to Spring Technology’s push-pull connector family for industrial instruments and optical measurement equipment. The same platform serves this CBTG1BG push-pull connector for UV curing radiometers and scales across plugs, panel sockets and PCB sockets.

• Plugs: TG 1B straight plugs with cable collet, including the two-contact layout used here.
• Panel sockets: ZGG.1B, ZEG.1B and ZCG.1B fixed panel sockets.
• PCB sockets: ZX 1B sockets with PCB contacts.
• Pin counts: 2–16 contacts across the 1B shell, with key G or keys A…M and R.

• Custom contact allocations and part numbers (such as the CBTG1BG-SMSM02-D52B) matched to each radiometer’s detector interface.
• Shielded sensor cable assemblies with 360° screen termination and bend relief.
• Grounding and EMC support for low-level photodiode signal circuits.
• Mating receptacle selection support, including keying and contact-layout confirmation.

The CBTG1BG-SMSM02-D52B is a two-contact, straight cable plug that can be considered for portable UV curing radiometers — its push-pull locking mechanism, shielded metal construction, solder termination and cable fixation features provide practical advantages for detachable UV detector connections. This connector shows how Spring Technology serves optical measurement equipment, aligning a shielded 1B plug with the customer’s UV radiometer requirements, and the company also provides professional customization services for both push-pull connectors and cable assemblies, offering tailored solutions to meet your specific technical requirements.

By matching the connector’s contact assignment, cable dimensions and electrical specifications to the radiometer design, manufacturers can develop convenient and maintainable sensor interfaces for industrial UV measurement equipment.

For more information about our 1B series connectors or to discuss your requirements, contact us at [email protected] or [email protected], or visit our website. Our engineering team will respond to your CBTG1BG push-pull connector for UV curing radiometers enquiry within 24 hours.

• CBTG2BG Push-Pull Connector for AOI Lighting Controllers 2026: 2B Series 19-Contact 5 A Plug for Multi-Channel Inspection Lighting Systems
• CBTG1BG Connectors for Multi-Angle Spectrophotometers 2026: 1B 6-Contact Cable Plug and Panel Receptacle for Color Measurement
• CBZE0BG Push-Pull Connector for Multi-Angle Gloss Meters 2026: 0B 4-Contact 7 A Panel Socket
• CBZG00BG Push-Pull Connector for Insulation Resistance Testers 2026: 00B Series 4-Contact M7 Panel Socket for Portable Test Instruments for US Client
• CBTG2FN Push-Pull Connector for Precision Machine Tools 2026: CBTG2FN-SMSM09-D520 and CBZL2FN-SFPM09-S000 for Multi-Channel Miniature Sensor Aggregation for Russian Client
• TGG.1B Straight Plug — Product Page
• 1B Series Connector