Project Description

TFA/FFA.0S Straight plug, cable collet and nut for fitting a bend relief

TFA.0S Straight plug, cable collet and nut for fitting a bend relief

1. TFA/FFA.0S push pull connector brief introduction:

TFA.0S can alternative with FFA.0S LEMO connector with stepped inserts for alignment but cheaper . Spring S Series connector is an ergonomic, modular, rugged, and reliable circular connector which is used for quick and safe plug-in self-latching

2. TFA/FFA.0S Lemo alternative connector description:

  • security of the Push-Pull self-latching system
  • multipole types 2,3,4 contacts
  • solder contacts
  • high packing density for space savings
  • polarisation by stepped insert (half-moon) fitted with male and female contacts
  • 360°screening for full EMC shielding.

3.TFA/FFA.0S Lemo alternative connector technical specification:

Pulling and inserting times >5000.
Humidity Maximum humidity up to 95% at a temperature of 60°
Temperature -45°~+125°
Vibration 10~20000HZ,15g
Mechanical shock 100g·6ms
Salt spray corrosion test >48h
Protection index (mated) IP50
Connector type Plug, Male Pins with stepped insert
Number of positions 2, 3, 4 pin
Termination Solder
Fastening type Push-pull
Shell material Brass
Shell finish Chrome
Shell color Silver
Contact material Brass
Contact finish-mating Gold
Contact color Gold
Insert material polyphenylene sulfite (PPS)
Cable opening 1.3mm~6.7mm

    Email us, We will answer your email shortly!

    SPRING P/N LEMO P/N Definition
    TFA.0S.302.CLAC**Z FFA.0S.302.CLAC**Z TFA straight Plug, cable collet and nut for fitting a bend relief, Shell Size 0S, 2 Pin Contacts, outer shell in chrome-plated brass, PPS insulator, male solder contacts, for 1.3~6.7mm diameter cable.
    TFA.0S.303.CLAC**Z FFA.0S.303.CLAC**Z TFA straight Plug, cable collet and nut for fitting a bend relief, Shell Size 0S, 3 Pin Contacts, outer shell in chrome-plated brass, PPS insulator, male solder contacts, for 1.3~6.7mm diameter cable.
    TFA.0S.304.CLAC**Z FFA.0S.304.CLAC**Z TFA straight Plug, cable collet and nut for fitting a bend relief, Shell Size 0S, 4 Pin Contacts, outer shell in chrome-plated brass, PPS insulator, male solder contacts, for 1.3~6.7mm diameter cable.

      Email us, We will answer your email shortly!

      If you have purchased Lemo connector and know the original model, please tell us. We will directly offer you our corresponding one.

      If you don’t know much about the connector, please make choose according the following factors:

      1. the use of the environment, indoors or outdoors, waterproof or not;
      2. the panel hole size, to select the appropriate plug and socket of right dimension;
      3. the current-voltage and the realization of the function, to determine the cores;
      4. select the appropriate clamp diameter and sheath;5 according to the actual needs of different angles of the keys, to determine the keying (the standard keys as G).

      You can also use the selection guide

        Email us, We will answer your email shortly!