Push-Pull Connector for Operating Room Equipment 2026: CBTE2BG-SMSM02, CBTG1BG-SMSM14 and CBZE2BA for Medical Electronics and Operating Room Gear for Russian Customers

Spring Technology supplied Russian customers with a complete push-pull connector for operating room equipment set — the CBTE2BG-SMSM02 25 A power plug, the CBTG1BG-SMSM14 high-density signal plug and the CBZE2BA board-level socket — covering power delivery, video and signal feeds and motherboard docking for medical electronics. Every specification in this guide is backed by the medical interconnect engineering of Spring Technology.

Pain point: Wiring operating room gear — surgical laser generators, electrosurgical units, motorized operating tables, endoscopy systems and robotic handpieces — where high-current power, high-density video signals and board-level docking each need a connector built for that exact job, in a sterile, safety-critical environment?

Core answer: For Russian customers in medical electronics and operating room gear, Spring Technology supplied three B series connectors covering the full interface chain: the CBTE2BG-SMSM02-D52B 2-pin male plug with TPU sealing boot, carrying up to 25 Amperes for high-power DC umbilical cables; the CBTG1BG-SMSM14-D52B 14-pin standard male plug with fine 2 A contacts for complex signal and video data feeds; and the CBZE2BA-SFSM02-0000 2-pin ZE socket with key A, mounted directly on the internal motherboard of medical carts and console control boxes as a board-level docking receiver.

Each connector in this push-pull connector for operating room equipment set is matched to its function: the TE-style plug adds splash protection for high-current power links, the 1B 14-pin plug packs fine signal contacts into a slim shell, and the ZE socket docks high-current power modules at board level.

• Latching Mechanism: Push-pull self-latching system (anti-vibration & shockproof)
• Recommended Hardware: Spring Technology Circular Connector
• Key Metric: 25 A power capability; 14-pin high-density signal path; IP54 splash protection on the TE plug

Operating room gear demands connectors that carry serious power, preserve delicate signals and survive constant cleaning and handling. The design highlights below are why this push-pull connector for operating room equipment set is specified for medical electronics:

• 25 A high-current capability — the CBTE2BG-SMSM02-D52B uses two thick pins to deliver up to 25 Amperes for surgical lasers, ESU/plasma knives and motorized operating tables.
• Splash-protected TE design — the TE-style plug adds a special internal sealing gasket plus a TPU sealing boot for slightly enhanced splash protection (IP54 when mated) compared with standard plugs.
• 14-pin high-density signal path — the CBTG1BG-SMSM14-D52B packs 14 fine gold-plated pins into a slim 1B shell, each rated 2 A, for complex signal and video data feeds.
• Board-level docking socket — the CBZE2BA-SFSM02-0000 mounts directly on the internal motherboard of a medical cart or console control box, acting as the docking receiver for a high-current power module.
• Push-pull self-latching — quick, secure connections for equipment that is connected, moved and serviced daily.
• Proven durability — >5,000 mating cycles and gold-plated contacts keep power and signal paths stable over years of clinical use.

The B series (0B, 1B and 2B shells) is Spring Technology’s compact push-pull platform for medical, industrial and field equipment. The three push-pull connector for operating room equipments in this order draw on the TE, TG and ZE design families within that platform, so spares and tooling stay consistent across the customer’s equipment range.

• TE-style plugs (IP54): splash-protected plugs with internal sealing gasket, in 2B and other shell sizes, for power and outdoor-adjacent applications.
• TG standard plugs: straight plugs from 2 to 16 pins on the 1B shell, with solder termination and gold-plated contacts.
• ZE fixed sockets: board- and panel-mount sockets in 0B, 1B and 2B shells, with keying options including A and G.
• Keying: key G and key A orientations in this order, with keys A–M and R available across the family.

• Custom pin allocations and part numbers (such as the CBTE2BG-SMSM02-D52B and CBZE2BA-SFSM02-0000) matched to each device’s power and signal plan.
• Sealing options from standard to splash-protected (IP54) with TPU boots for demanding environments.
• Pre-wired cable assemblies and board-level harnesses for medical carts and consoles.
• Key orientation selection to prevent mismating where several connectors share one device.

Operating rooms and medical carts combine high-power devices, imaging systems and patient monitoring in one clinical workflow. This push-pull connector for operating room equipment set covers the three connection points that hold that workflow together.

Surgical laser generators, electrosurgical units (ESU/plasma knives) and heavy-duty motorized operating tables draw serious current from their main power supply. The 25 A CBTE2BG-SMSM02-D52B push-pull connector for operating room equipment terminates these high-power DC umbilical cables with splash protection for the operating room environment.

High-definition endoscopy camera heads, surgical robotic handpieces and multi-lead patient monitoring arrays send complex signals back to the main motherboard console. The 14-pin CBTG1BG-SMSM14-D52B push-pull connector for operating room equipment carries those video and signal feeds with fine gold-plated contacts rated 2 A per pin.

Inside the medical cart or console control box, this push-pull connector for operating room equipment docks directly on the internal motherboard as the receiver for a high-current power module — a clean, replaceable board-level interface that simplifies assembly and service.

This B series connector delivery for Russian medical customers shows how Spring Technology covers the full operating room interface chain — from the 25 A CBTE2BG-SMSM02-D52B power plug to the 14-pin CBTG1BG-SMSM14-D52B signal plug and the CBZE2BA-SFSM02-0000 board-level socket, every connector was aligned with the customer's medical electronics requirements. Spring Technology also provides professional customization services for both push-pull connectors and cable assemblies, offering tailored solutions to meet your specific technical requirements.

For more information about our B series connectors or to discuss your requirements, contact us at [email protected] or [email protected], or visit our website.

Building medical electronics or operating room equipment? Send us your power and signal requirements — our engineering team will respond with a tailored push-pull connector for operating room equipment proposal within 24 hours.

• Push-pull Connectors for Operating Tables: Reliable and Safe Connections for Modern Medical Equipment
• MHF.3B.872.CLL 3B Operating Table Connector: 13-Contact Push-Pull Receptacle for Medical Equipment
• 1B Elbow Plug and 0B Panel-Mount Socket 2026: Custom Medical Equipment Connectors for Russian Client
• Spring Technology Push-pull Connectors for Robotic Arm
• TEG.2B Straight Plug (IP54) — Product Page
• TGG.1B Straight Plug — Product Page
• ZEG.2B Fixed Socket — Product Page
• 2B Series Connector