Push-Pull Connector for Camera Rigs 2026: CBTG2BA-SMSM02-D52B and CBTE2BA-SMSM02-D52B for Premium Cinematography and Heavy-Duty Camera Rigging for US Customers

Spring Technology supplied US customers with a 2B push-pull connector for camera rigs pair — the CBTE2BA-SMSM02-D52B splash-protected plug for exterior gyro head power and the CBTG2BA-SMSM02-D52B plug for interior battery distribution — routing major 24V/14V DC power across cranes, pursuit vehicles and studio setups with gold-plated contacts rated for over 5,000 mating cycles. Every specification in this guide is backed by the cinematography interconnect engineering of Spring Technology.

Pain point: Routing heavy DC power on a professional film set — from the master battery array in the broadcast van to a gyro-stabilized camera head riding on a chase car or helicopter — where rain, dew and tracking dust can kill a 25 A motor power line, and a connector failure stops the whole shoot?

Core answer: For US customers in premium cinematography and heavy-duty camera rigging, Spring Technology supplied two 2B series power plugs that handle major 24V/14V DC power routing across camera cranes, pursuit vehicles and studio setups. The CBTE2BA-SMSM02-D52B is built into the exterior power cables for gyro-stabilized camera heads, such as DJI Ronin 2 or heavy commercial heads, when mounted externally on chase cars, helicopters or outdoor camera cranes — its TE-style sealing gasket blocks sudden rain, dew or tracking dust from ruining the 25 A main motor power line. The CBTG2BA-SMSM02-D52B is used on the sheltered inside of the broadcast van or video village matrix, linking the heavy master battery block arrays to the distribution breakout boxes.

This push-pull connector for camera rigs pair combines the TEG.2B splash-protected plug and the TGG.2B standard plug, two 2B series designs sharing one push-pull platform. Both are keyed A and carry 2 thick pins for high-current DC power.

• Latching Mechanism: Push-pull self-latching system (anti-vibration & shockproof)
• Recommended Hardware: Spring Technology Circular Connector
• Key Metric: 2-pin high-current DC power; 25 A motor power line capability; IP54 splash protection on the exterior plug

Professional camera rigs separate exterior power runs from sheltered interior distribution. The design highlights below are why this push-pull connector for camera rigs pair is specified for premium cinematography and heavy-duty rigging:

• 25 A main motor power line — the CBTE2BA-SMSM02-D52B carries the high-current line that drives gyro-stabilized camera head motors.
• TE-style sealing gasket for exterior use — blocks sudden rain, dew and tracking dust from reaching the power contacts on chase cars, helicopters and outdoor cranes (IP54 when mated).
• Dual-voltage routing (24V/14V DC) — the pair handles major 24V/14V DC power routing across cranes, pursuit vehicles and studio setups.
• Heavy master battery to breakout box link — the CBTG2BA-SMSM02-D52B connects battery block arrays to distribution breakout boxes inside the broadcast van or video village.
• Gold-plated contacts — stable, low-resistance connections for high-current delivery and reliable voltage rails.
• Proven durability — >5,000 mating cycles and 100 g·6 ms shock tolerance for daily location and studio work.

The 2B series is Spring Technology’s mid-large push-pull connector family, ideal for high-current power in broadcast and cinematography equipment. Both push-pull connector for camera rigss in this order share the same 2B platform, so cable assemblies and panel ports stay consistent across the rig.

• Plugs: TE-style splash-protected plugs (IP54, this order), standard TG straight plugs (this order), plugs with bend relief, elbow plugs.
• Pin counts: 2 to 26 pins, with solder or PCB termination options.
• Sockets: fixed sockets, PCB-contact sockets and free sockets for panel and cable mounting.
• Keying: key A used in this order, with keys G and A–M/R available for circuit segregation.

• Custom pin allocations and part numbers (such as the CBTE2BA-SMSM02-D52B / CBTG2BA-SMSM02-D52B pair) matched to the rig’s power plan.
• Sealing options from standard to splash-protected (IP54) for exterior and interior cable roles.
• Pre-wired cable assemblies with heavy-duty jackets for cranes, vehicles and studio use.
• Key orientation selection to keep power circuits segregated from data lines on the camera.

From the master battery array to the gyro-stabilized head on a moving vehicle, this push-pull connector for camera rigs pair carries the power that keeps premium cameras rolling.

Gyro-stabilized camera heads, such as DJI Ronin 2 or heavy commercial heads, need a protected 25 A power feed when mounted externally on chase cars, helicopters or outdoor camera cranes. The CBTE2BA-SMSM02-D52B push-pull connector for camera rigs delivers that feed with its sealing gasket guarding against weather and dust.

Exterior mounts face rain, dew and tracking dust throughout the day. The splash-protected TE-style plug keeps the main motor power line reliable on moving platforms, while the push-pull lock holds under vehicle and rotor vibration.

Inside the broadcast van or video village matrix, the CBTG2BA-SMSM02-D52B links heavy master battery block arrays to the distribution breakout boxes, routing 24V/14V DC to the equipment racks in a sheltered, clean environment.

This 2B push-pull connector for camera rigs delivery for US customers shows how Spring Technology covers both sides of premium cinematography power — from the CBTE2BA-SMSM02-D52B exterior plug on gyro-stabilized heads to the CBTG2BA-SMSM02-D52B interior battery distribution plug, every detail was aligned with the customer's heavy-duty camera rigging requirements. Spring Technology also provides professional customization services for both push-pull connectors and cable assemblies, offering tailored solutions to meet your specific technical requirements.

For more information about our 2B series connectors or to discuss your requirements, contact us at [email protected] or [email protected], or visit our website.

Building a cinematography power system? Send us your voltage, current and cable role requirements — our engineering team will respond with a tailored push-pull connector for camera rigs proposal within 24 hours.

• 0B FIZ Connector 2026: CBTG0BG-SMSM07-D52B and CBZG0BG-SFSM07-0000 Wireless Lens Control Connectors for Russian Client
• 1K Series Connector 2026: CBTG1KG-SMSM07-D52B for Tethered Drone Umbilical Cables for USA Client
• TEG.2B Straight Plug (IP54) — Product Page
• TGG.2B Straight Plug — Product Page
• 2B Series Connector