O trabalho significativo dos conectores de circuito em circuitos coordenados

First of all, the connector is an indispensable part of the electronic equipment. Observe the path of current flow, you will always find one or more connectors. The form and structure of the connector are ever-changing. With different application objects, frequency, power, application environment, etc., there are various types of connectors. For example, the connector for lighting on the court and the connector for the hard drive, and the connector for lighting the rocket are very different. But no matter what kind of connector, we must ensure that the current flows smoothly and reliably.

Integrated circuit connector is a component that our electronic engineering technicians often contact. Its function is very simple: build a bridge of communication between the blocked or isolated circuits in the circuit, so that the current flows and the circuit realizes the predetermined function. In general terms, the connection of the connector is not limited to current. In today’s rapid development of optoelectronic technology, in the optical fiber system, the carrier for transmitting signals is light, glass and plastic replace the wires in ordinary circuits, but the optical signal Connectors are also used in the pathway, and they have the same function as circuit connectors.

Take the car battery as an example. Assuming that the battery cable is fixedly welded to the battery, the automobile manufacturer increases the workload for installing the battery, and increases the production time and cost. When the battery is damaged and needs to be replaced, the car must be sent to the repair station, the old one is removed by welding, and the new one is welded. For this reason, more labor costs are required. With the connector, you can save a lot of trouble, buy a new battery from the store, disconnect the connector, remove the old battery, install the new battery, and reconnect the connector. This simple example illustrates the benefits of connectors. It makes the design and production process more convenient and more flexible, reducing production and maintenance costs.

Since we only care about circuit connectors, imagine what would happen if there were no connectors? At this time, the circuit must be permanently connected together with continuous conductors. For example, if the electronic device is connected to the power supply, the two ends of the connecting wire must be firmly connected to the electronic device and the power supply by some method (such as welding). As a result, both production and use have brought a lot of inconvenience.