При использовании разъемов их необходимо использовать и хранить надлежащим образом, чтобы избежать ненужных проблем.
When receiving the connector, we should carefully observe the outer packaging to see if there is any obvious damage, and also to see if the connector itself has any damage. We must make sure that the connectors we see are in good condition so as not to affect our use of connected machines. When not using the connector for the time being, do not place the connector at random, especially in a place with sunlight. If you forget to place the connector accidentally, the connector will be damaged due to long-term exposure to sunlight, which will affect its use and even cause a safety accident. Therefore, we must carefully remember where the connectors can be stored and not cause accidents due to negligence.
Connectors cannot be placed at high temperatures. Continuous high temperature or high humidity will damage the connector, especially in the environment with chemical substances, the connector will be corroded, so the outer metal protective layer will lose its protective effect, causing the internal current circuit to be damaged, and it will become non-conductive waste.
When you need to move the connector, don’t panic, be careful, to avoid the connector contacting hard objects, causing damage to the connector, do not place it under a heavy object, so as not to squeeze the connector.
There is another enemy of the connector, and that is the grease object. During storage or use, if it comes into contact with grease, the connector will lose its original function and become an obstacle to our work. Although these are small things in our lives, we cannot ignore them, and we cannot lose a lot because of small things.